|
Information |
|
|
|
Payment Options |
You do not need a PayPal account to pay by
Credit Card.
Copyright © 2008-2012
All Rights Reserved
|
|
|
|
 |
|
SPUHR Sniper Scope Cantilever UniMount
|
| Description |
SPUHR's innovative one-piece Mil-Spec scope mount offers unique features such as
multiple accessory attachment points, a built-in bubble level, various cants,
integrated indexing mechanism and 45-degree ring construction.
Durability
The scope mounts manufactured by SPUHR are extremely sturdy and can be used on light or heavy recoiling sniper rifles.
Its innovative construction protects the scope from damage due to flexing during heavy recoil.
Scope rotation
SPUHR uses a patented solution to index the rotation of the scope.
It uses a tool/gauge (included) to correctly index the scope to the mount and gun.
Accessible and Readable Turrets
The SPUHR Cantilever unimount rings are cut at a 45 degree angle instead of horizontally as other scope mounts
thus providing several advantages. The screws holding the parts together are not in the way of the windage and parallax turrets,
allowing the shooter to quickly determine the settings of the turrets.
It also gives the shooter a horizontal line that while not seen directly, helps the shooter not to rotate his gun unintentionally.
The rings have an index mark on the top and on the right side, making low turrets easily readable.
Accessories
SPUHR's revolutionary design allows the use of various accessories such as the angle
cosine indicator, back up sights, lasers etc. With traditional mounts this can
be achieved only if there is sufficient space on the middle tube for additional
rings. The SPUHR Sniper Mounts have interface surfaces directly built on the mount,
thus making it possible to mount accessories either by Picatinny rails or as direct interfaces for
certain accessories such as the angle cosine indicators and red dot sights.
CORETAC SOLUTIONS carry a selection of interfaces for popular accessories.
Level
The SPUHR sight mounts have an anti-cant level included inside the mount
which is easily seen during low light conditions.
Tilt
The SPUHR unimounts come in various tilt configurations starting from zero to
20 MOA with standard tilt being 20 MOA. The tilt is clearly engraved on the mount.
Mounting Platform
SPUHR Cantilever unimounts are available for
Picatinny Rail Platforms and they are approximately 40% longer than the standard Unimount system.
History on SPUHR
The company started a few years ago in Sweden and has been developing solutions for major manufacturers,
international military forces and law enforcement customers.
All of their products are designed and manufactured locally in Sweden.
This gives the company maximum control over their production thus ensuring the highest precision and quality control.
SPUHR Mounting System Video Overview
|
| Features |
- 7075 T651 Aircraft Aluminum Alloy with Stainless steel screws
- One piece Cantilever Unimount construction
- Approximately (7.09") 40% longer than the standard Unimount system
- 45 degree ring construction
- 3 screw ring mount
- Built in bubble level
- Mil-Spec sealed hard coat
- Scope rotation indexing tool
- Built in Cant (See options)
- Available in 30mm and 34mm (See options)
- Various accessory interfaces available (See options)
- Weight: 250-300 Grams
|
| Options |
| Part No: |
Mount TYPE: |
Ring Size: |
Mount Height: |
Mount Length: |
Mount Tilt/Cant: |
Mount Price: |
Part Ava: |
| SP-3016 |
Picatinny |
30mm |
37mm/1.45" |
150mm/5.9" |
0Mil/0MOA |
$475CDN |
Call |
| SP-3616 |
Picatinny |
30mm |
37mm/1.45" |
150mm/5.9" |
6Mil/20.6MOA |
$475CDN |
|
| |
|
|
|
|
|
|
|
| SP-4016 |
Picatinny |
34mm |
37mm/1.45" |
150mm/5.9" |
0Mil/0MOA |
$475CDN |
Call |
| SP-4616 |
Picatinny |
34mm |
37mm/1.45" |
150mm/5.9" |
6Mil/20.6MOA |
$475CDN |
Call |
|
|
|
|
|
|
