International Barrels Inc. produces match grade barrels for bolt action rifles.
They also produce prefit barrels for all the popular actions that run off of a barrel nut system.
All of their barrels are made from the best rifle grade steel available.
They are honed, hand lapped and double stress relieved during the barrel making process.
IBI takes great care during the buttoning process to make sure their end product
exceeds the standards of the worlds top shooters.
IBI Tikka prefit barrels come chambered and threaded for Tikka rifles utilizing a barrel nut system.
They come in various calibers and twist rates such as .223 (1:8 or 1:7 twist), .308 (1/10 twist), .300 WM (1/10 twist), 6.5 Creedmoor (1:8 twist), 6.5 PRC (1:8 Twist).
If there is another caliber you want please ask!
These barrels require NO gunsmithing! But what they do require is for the user (or a gunsmith)
to set the headspace to ensure safe firing.
Button Rifling Process:
Button Rifling is a modern method that creates the grooves in the cold surface of a rifle bore by displacing metal using a bullet-shaped,
super-hard button of tungsten carbide. The rifling button has the reverse pattern of the groove profile ground into its surface.
As the rifling button is pushed or pulled through the barrel, the groove pattern is ironed into the bore surface by displacement.
In most cases, the button remains free to rotate during this process, dependent on the angle of the grooves
in its surface to cause the desired degree of rifling twist.
Advantages of button rifling:
Button rifling leaves a smooth, bright finish inside the barrel.
Button-rifled barrels are very accurate.
Bore and groove dimensions are very consistent.
Product Features
Tikka Prefit Match Grade Barrel with Barrel Nut System
Honed
Hand Lapped
Double Stress Relieved
Threading: 1.00x16 TPI
Contour: Similar to M24/M40
Material: Stainless Steel 416R
Included: Barrel Nut and Barrel
Not included: Barrel Nut Wrench or Thread Protector
Made in Canada By International Barrels Inc.
Purchase Options
If you are looking for options not listed
below (Caliber, Twist Rate, Contour, Thread Size, Length, etc.),
please Call or Email.
This item can NOT be exported
Outside of CANADA
Please review our shipping policy before ordering.
Watch how the IBI Barrels are made
